Swivel eye, Self-locking D1=M12, Precipitation-hardened stainless steel, Components: aluminium blue

Material:
Pin and threaded element, stainless steel 1.4542.
Aluminium handle and push button.
Spring in stainless steel.

Version:
Precipitation-hardened screw and threaded element.
Blue anodised handle.
Orange anodised push button.
Order example:
K2555.10
Note:
Swivel eyes with cable can be used universally as a quick and easy transport element for transporting components, workpieces, fixtures, etc. using manual force.
The threaded segments can be unlocked by pressing the push button, and the swivel eye bolt can be inserted into or removed from the threaded hole. When the push button is released, the threaded segments lock securely. This eliminates the time-consuming process of screwing and unscrewing, as is the case with an eye bolt, for example.

The prerequisite for use is a calibrated threaded hole with appropriate material strength.

Each swivel eye comes with detailed operating instructions.

Corrosion resistant.
Temperature range:
max. +250 °C.
Mounting:
Mounting:
1. Press the button and hold it down.
2. Fit the swivel eye bolt.
3. Release the button (the button must
be in the initial position again).
4. Tighten the swivel eye by hand until
that it is fully in contact with the
seating surface.
5. Make sure that the segments
threaded are engaged in the thread
locating.

Disassembly:
1. Turn the swivel eye about a quarter
back counter-clockwise.
2. Press the button and hold it down.
3. Remove the swivel eye bolt.
4. Release the button.