PAK0536.10406
Telescopic slide partial extension, L=406, Steel, Components: steel, S=276 1 piece = 1 pair phase-out part
Estimated delivery: On request
Material:
Rails in steel.
Ball cages in plastic.
Balls in C steel.
Version:
Hot-dip galvanised rails.
Hardened balls.
Order example:
K0536.10214 (Sold in pairs)
Note:
With telescopic slides with partial extension, the stroke is shorter than the installed length. They are a low-cost solution for drawers or similar mechanisms with low friction. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a vertically mounted telescopic pair when the full extension stroke is used. The stated load capacities refer to the maximum value at 100.000 cycles. Telescopic slides can be extended on both sides.
Observe:
All telescopic slides are tested in accordance with standard DIN EN 15338.
Rails in steel.
Ball cages in plastic.
Balls in C steel.
Version:
Hot-dip galvanised rails.
Hardened balls.
Order example:
K0536.10214 (Sold in pairs)
Note:
With telescopic slides with partial extension, the stroke is shorter than the installed length. They are a low-cost solution for drawers or similar mechanisms with low friction. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a vertically mounted telescopic pair when the full extension stroke is used. The stated load capacities refer to the maximum value at 100.000 cycles. Telescopic slides can be extended on both sides.
Observe:
All telescopic slides are tested in accordance with standard DIN EN 15338.
| Material | Steel |
|---|
| Capacidade de carga por par kg | 15 |
|---|---|
| L | 406 |
| A | 352 |
| Profundidade da cavidade de - até | 406 - 672 |
| A1 | 330 |
| Versão 1 | Extensão parcial |
| Material dos componentes | aço |
| Denominação | Calha telescópica |
| Curso S | 276 |
