PAK1747.072140
Tensioning rail for clamping system M SB=72 L=140 tool steel hardened and polished, Short version
Estimated delivery: On request
Material:
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Order example:
K1747.050130
Note:
The T-slot clamping rails can be fastened via several interfaces.
1. Lateral clamping edge for clamp set. The clamps can be fixed in any position.
2. Through holes for cylinder head screws according to DIN
3. An alignment groove with 18H7 in tables with T-slots.
4. Fitting bores of Ø12F7 and Ø16F7 for modular clamping systems with hole spacing of 50 mm.
Application:
With the short T-slot clamping rails, clamping and workholding tasks can be carried out in a confined space. The precision toothed surface allows precise positioning of the fixed jaws. Thanks to the lateral scale, each position of the jaws can be documented and set identically when repeated. Stops can be mounted in the lateral threaded holes.
Advantages:
Universal and flexible use.
With several short clamping rails, flexible clamping scenarios can be implemented.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Order example:
K1747.050130
Note:
The T-slot clamping rails can be fastened via several interfaces.
1. Lateral clamping edge for clamp set. The clamps can be fixed in any position.
2. Through holes for cylinder head screws according to DIN
3. An alignment groove with 18H7 in tables with T-slots.
4. Fitting bores of Ø12F7 and Ø16F7 for modular clamping systems with hole spacing of 50 mm.
Application:
With the short T-slot clamping rails, clamping and workholding tasks can be carried out in a confined space. The precision toothed surface allows precise positioning of the fixed jaws. Thanks to the lateral scale, each position of the jaws can be documented and set identically when repeated. Stops can be mounted in the lateral threaded holes.
Advantages:
Universal and flexible use.
With several short clamping rails, flexible clamping scenarios can be implemented.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
| Material | Tool steel |
|---|---|
| Finishing | Hardened and polished |
| H2 | 30 |
|---|---|
| L4 | 77 |
| B2 | 30 |
| H3 | 15 |
| L | 140 |
| H | 72 |
| H1 | 14 |
| L2 | 40 |
| B1 | 42 |
| L8 | 0,7 |
| H4 | 15 |
| D3 | M6 |
| D2 | 26 |
| H5 | 22 |
| L1 | 100 |
| D4 | M6 |
| B3 | 58 |
| L7 | 2 |
| D1 | 16 |
| B | 72 |
| B4 | 18 |
| L3 | 100 |
| Versão 2 | versão curta |
| Versão 1 | para sistema de fixação múltiplo |
| Denominação | Calha tensora |
| Adequado para larguras de sistemas | 72 |
Product Variations
| Model | Material | Finishing | H2 | L4 | B2 | H3 | L | H | H1 | L2 | B1 | L8 | H4 | D3 | D2 | H5 | L1 | D4 | B3 | L7 | D1 | B | B4 | L3 | Versão 2 | Versão 1 | Denominação | Adequado para larguras de sistemas | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1747.050130 PAK1747.050130 | Tool steel | Hardened and polished | 22 | 77 | 19 | 10 | 130 | 50 | 10 | 40 | 28 | 0,5 | 10 | M6 | 20 | 16 | 100 | M6 | 36 | 1,5 | 12 | 50 | 18 | 100 | versão curta | para sistema de fixação múltiplo | Calha tensora | 50 | |||
| PAK1747.072140 PAK1747.072140 | Tool steel | Hardened and polished | 30 | 77 | 30 | 15 | 140 | 72 | 14 | 40 | 42 | 0,7 | 15 | M6 | 26 | 22 | 100 | M6 | 58 | 2 | 16 | 72 | 18 | 100 | versão curta | para sistema de fixação múltiplo | Calha tensora | 72 | |||
| PAK1747.100148 PAK1747.100148 | Tool steel | Hardened and polished | 30 | 77 | 45 | 15 | 148 | 72 | 14 | 40 | 58 | 0,85 | 15 | M8 | 26 | 22 | 100 | M6 | 86 | 2,5 | 16 | 100 | 18 | 100 | versão curta | para sistema de fixação múltiplo | Calha tensora | 100 | |||
PAK1747.050130
Tensioning rail for clamping system M SB=50 L=130 tool steel hardened and polished, Short version
Material = Tool steel
Finishing = Hardened and polished
H2 = 22
L4 = 77
B2 = 19
H3 = 10
L = 130
H = 50
H1 = 10
L2 = 40
B1 = 28
L8 = 0,5
H4 = 10
D3 = M6
D2 = 20
H5 = 16
L1 = 100
D4 = M6
B3 = 36
L7 = 1,5
D1 = 12
B = 50
B4 = 18
L3 = 100
Versão 2 = versão curta
Versão 1 = para sistema de fixação múltiplo
Denominação = Calha tensora
Adequado para larguras de sistemas = 50
PAK1747.072140
Tensioning rail for clamping system M SB=72 L=140 tool steel hardened and polished, Short version
Material = Tool steel
Finishing = Hardened and polished
H2 = 30
L4 = 77
B2 = 30
H3 = 15
L = 140
H = 72
H1 = 14
L2 = 40
B1 = 42
L8 = 0,7
H4 = 15
D3 = M6
D2 = 26
H5 = 22
L1 = 100
D4 = M6
B3 = 58
L7 = 2
D1 = 16
B = 72
B4 = 18
L3 = 100
Versão 2 = versão curta
Versão 1 = para sistema de fixação múltiplo
Denominação = Calha tensora
Adequado para larguras de sistemas = 72
PAK1747.100148
Tensioning rail for clamping system M SB=100 L=148 tool steel hardened and polished, Short version
Material = Tool steel
Finishing = Hardened and polished
H2 = 30
L4 = 77
B2 = 45
H3 = 15
L = 148
H = 72
H1 = 14
L2 = 40
B1 = 58
L8 = 0,85
H4 = 15
D3 = M8
D2 = 26
H5 = 22
L1 = 100
D4 = M6
B3 = 86
L7 = 2,5
D1 = 16
B = 100
B4 = 18
L3 = 100
Versão 2 = versão curta
Versão 1 = para sistema de fixação múltiplo
Denominação = Calha tensora
Adequado para larguras de sistemas = 100