PAK2156.24

Threaded lifting pin, With rotatable shackle, D1=M24, F1=23, Manganese-phosphated steel

Name: Threaded lifting pin, With rotatable shackle, D1=M24, F1=23, Manganese-phosphated steel
SKU: PAK2156.24

No Stock

Estimated delivery: On request

Datasheet

Material:
Hardened steel pin, hardened.
Shackle in hardened steel, hardened.
Threaded element in stainless steel 1.4542.
Aluminium push button.
Spring in stainless steel.
Version:
Pin with manganese phosphate coating.
Shackle with manganese phosphate coating.
Precipitation-hardened threaded element.

Orange anodised push button.
Order example:
K2156.10
Note:
Swivel eyes with a movable swivel shackle are used as a quick and easy transport/support element.
The threaded segments can be unlocked by pressing the push button. The swivel eye can then be inserted into or removed from the threaded hole. When the push button is released, the threaded segments lock securely. The time-consuming process of screwing in and unscrewing, as is the case with an eye bolt, for example, is therefore no longer necessary.

During lifting, the swivel shackle is always aligned in the direction of pull, without the pin rotating. The safety pin on the shackle protects the push button against accidental release under linear tension.

For its use, a threaded hole with suitable dimensions and the corresponding strength is required.

Each swivel eye comes with detailed operating instructions.

Corrosion resistant.

With TÜV certification (German).

The specifications X min., F1, F2 and F3 are tested in accordance with DIN EN 13155 and the test load corresponds to 3 times the nominal load.
Temperature range:
max. +250 °C.
Thread size M24: from 150 °C, linear reduction of load capacity by 23%.
Mounting:
Mounting:
1. Press the button and hold it down.
2. Fit the swivel eye bolt.
3. Release the button (the button must
be in the initial position again).
4. Tighten the swivel eye by hand until
that it is fully in contact with the
seating surface.
5. Make sure that the segments
threaded are engaged in the thread
locating.

Disassembly:
1. Turn the swivel eye about a quarter
back counter-clockwise.
2. Press the button and hold it down.
3. Remove the swivel eye bolt.
4. Release the button.

Technical information
Measures

Material	Steel
Finishing	With manganese phosphate
Thread	M24

L4	79,2
L9	59
L10	22
L2	36
L5	55,6
F2 kN	11,1
F3 kN	8,6
F1 kN	23
D2	20,7
L1	27
D5	59
D4	50
L7	102
L6	70
D6	35
Binário de aperto máx. Nm	3
D1	M24
L3	42
Denominação	Olhal giratório
L8	173

Product Variations

Model	Material	Finishing	Thread	L4	L9	L10	L2	L5	L8	F2 kN	F3 kN	F1 kN	D2	L1	D5	D4	L7	L6	D6	Binário de aperto máx. Nm	D1	L3	Denominação
PAK2156.08 PAK2156.08	Steel	With manganese phosphate	M8	54,9	38	8	17,8	42,5	123,7	0,9	0,8	2,1	6,62	12	38	33,5	68	46	20	2	M8	25,7	Olhal giratório
PAK2156.10 PAK2156.10	Steel	With manganese phosphate	M10	54,9	38	10	20	42,5	123,7	1,5	1,5	3,9	8,35	14	38	33,5	68	46	20	2	M10	25,7	Olhal giratório
PAK2156.12 PAK2156.12	Steel	With manganese phosphate	M12	54,9	38	12	24	42,5	123,7	2,5	2,3	6,2	10,07	17	38	33,5	68	46	20	2	M12	25,7	Olhal giratório
PAK2156.16 PAK2156.16	Steel	With manganese phosphate	M16	54,9	38	12	24	42,5	123,7	4,5	4,2	8,4	13,8	17	38	33,5	68	46	20	2	M16	25,7	Olhal giratório
PAK2156.20 PAK2156.20	Steel	With manganese phosphate	M20	73,7	59	17	30	55,6	167,5	7,7	5,0	16,6	17,25	22	59	50	102	70	35	3	M20	36,5	Olhal giratório
PAK2156.24 PAK2156.24	Steel	With manganese phosphate	M24	79,2	59	22	36	55,6	173	11,1	8,6	23	20,7	27	59	50	102	70	35	3	M24	42	Olhal giratório

PAK2156.08

Threaded lifting pin, With rotatable shackle, D1=M08, F1=2, 1, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M8 L4 = 54,9 L9 = 38 L10 = 8 L2 = 17,8 L5 = 42,5 L8 = 123,7 F2 kN = 0,9 F3 kN = 0,8 F1 kN = 2,1 D2 = 6,62 L1 = 12 D5 = 38 D4 = 33,5 L7 = 68 L6 = 46 D6 = 20 Binário de aperto máx. Nm = 2 D1 = M8 L3 = 25,7 Denominação = Olhal giratório

PAK2156.10

Threaded lifting pin, With rotatable shackle, D1=M10, F1=3, 9, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M10 L4 = 54,9 L9 = 38 L10 = 10 L2 = 20 L5 = 42,5 L8 = 123,7 F2 kN = 1,5 F3 kN = 1,5 F1 kN = 3,9 D2 = 8,35 L1 = 14 D5 = 38 D4 = 33,5 L7 = 68 L6 = 46 D6 = 20 Binário de aperto máx. Nm = 2 D1 = M10 L3 = 25,7 Denominação = Olhal giratório

PAK2156.12

Threaded lifting pin, With rotatable shackle, D1=M12, F1=6, 2, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M12 L4 = 54,9 L9 = 38 L10 = 12 L2 = 24 L5 = 42,5 L8 = 123,7 F2 kN = 2,5 F3 kN = 2,3 F1 kN = 6,2 D2 = 10,07 L1 = 17 D5 = 38 D4 = 33,5 L7 = 68 L6 = 46 D6 = 20 Binário de aperto máx. Nm = 2 D1 = M12 L3 = 25,7 Denominação = Olhal giratório

PAK2156.16

Threaded lifting pin, With rotatable shackle, D1=M16, F1=8, 4, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M16 L4 = 54,9 L9 = 38 L10 = 12 L2 = 24 L5 = 42,5 L8 = 123,7 F2 kN = 4,5 F3 kN = 4,2 F1 kN = 8,4 D2 = 13,8 L1 = 17 D5 = 38 D4 = 33,5 L7 = 68 L6 = 46 D6 = 20 Binário de aperto máx. Nm = 2 D1 = M16 L3 = 25,7 Denominação = Olhal giratório

PAK2156.20

Threaded lifting pin, With rotatable shackle, D1=M20, F1=16, 6, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M20 L4 = 73,7 L9 = 59 L10 = 17 L2 = 30 L5 = 55,6 L8 = 167,5 F2 kN = 7,7 F3 kN = 5,0 F1 kN = 16,6 D2 = 17,25 L1 = 22 D5 = 59 D4 = 50 L7 = 102 L6 = 70 D6 = 35 Binário de aperto máx. Nm = 3 D1 = M20 L3 = 36,5 Denominação = Olhal giratório

PAK2156.24

Threaded lifting pin, With rotatable shackle, D1=M24, F1=23, Manganese-phosphated steel

Material = Steel Finishing = With manganese phosphate Thread = M24 L4 = 79,2 L9 = 59 L10 = 22 L2 = 36 L5 = 55,6 L8 = 173 F2 kN = 11,1 F3 kN = 8,6 F1 kN = 23 D2 = 20,7 L1 = 27 D5 = 59 D4 = 50 L7 = 102 L6 = 70 D6 = 35 Binário de aperto máx. Nm = 3 D1 = M24 L3 = 42 Denominação = Olhal giratório

Quote

Threaded lifting pin, With rotatable shackle, D1=M24, F1=23, Manganese-phosphated steel

Product Variations