Unilock vice clamping station, 3 times without anti-twist protection, D=450, H=75, Oxidised steel, Components: case-hardened steel

Material:
Base plate, steel.
Clamping module in case-hardened steel.
Version:
Base plate, ground and oxidised on both sides.
Clamping module with hardened and polished functional surfaces.
Note:
Pre-assembled turning clamping stations with integrated UNILOCK ESM138-C clamping modules for turning and milling centres. Clamping stations make it possible to combine turning technology and stationary clamping technology. The clamping stations are fastened to the coordinate table using centring pins and sliding nuts.
The clamping modules are actuated centrally via a pneumatic connection.
The high clamping forces are generated by the integrated spring assembly (the unit is clamped without pressure). A visual indicator with an indicator pin shows that the turbo function is activated.
The release process is pneumatic.

With UNILOCK guide pins in combination with the clamping screws M10, M12, M16, the following holding forces are possible:
- Holding force (M10) 35.000 N/module
- Holding force (M12) 50.000 N/module
- Holding force (M16) 75.000 N/module
Holding force with cylinder head screw DIN EN ISO 4762-12.9.

The guide pins can only be fastened in conjunction with an exchange unit in the clamping module.
Operating mode:
K2351.320045075
Max. speed: 1400 1/min

K2351.520057079
Max. speed: 2000 1/min
Temperature range:
+5 °C to +60 °C.
On request:
Clamping station for special dimensions.
Scope of delivery:
- Clamping station.
- Clamping screws.
- Centring pin.
- Alignment pins.
- Push-in nuts.
- Eye bolts.
- Operating instructions.
Accessories:
- Guide pin for the UNILOCK modular system K0967.
- UNILOCK exchange pallets for zero-point clamping system K1218.
- UNILOCK protective pin for clamping modules K1010.
- UNILOCK protective cover for clamping modules K1010.
Technical data:
- Opening pressure: 6 bar, lubricated air.
- Air connection: G1/8.
- Repeat accuracy ≤0,005 mm.
- Concentricity <0,02 mm.
Drawing note:
1) Visual indication of the turbo function