PAK2351.520057079
Unilock vice clamping station, Quintuple without anti-twist protection, D=570, H=79, Oxidised steel, Components: steel
Estimated delivery: On request
Material:
Base plate, steel.
Clamping module in case-hardened steel.
Version:
Base plate, ground and oxidised on both sides.
Clamping module with hardened and polished functional surfaces.
Note:
Pre-assembled turning clamping stations with integrated UNILOCK ESM138-C clamping modules for turning and milling centres. Clamping stations make it possible to combine turning technology and stationary clamping technology. The clamping stations are fastened to the coordinate table using centring pins and sliding nuts.
The clamping modules are actuated centrally via a pneumatic connection.
The high clamping forces are generated by the integrated spring assembly (the unit is clamped without pressure). A visual indicator with an indicator pin shows that the turbo function is activated.
The release process is pneumatic.
With UNILOCK guide pins in combination with the clamping screws M10, M12, M16, the following holding forces are possible:
- Holding force (M10) 35.000 N/module
- Holding force (M12) 50.000 N/module
- Holding force (M16) 75.000 N/module
Holding force with cylinder head screw DIN EN ISO 4762-12.9.
The guide pins can only be fastened in conjunction with an exchange unit in the clamping module.
Operating mode:
K2351.320045075
Max. speed: 1400 1/min
K2351.520057079
Max. speed: 2000 1/min
Temperature range:
+5 °C to +60 °C.
On request:
Clamping station for special dimensions.
Scope of delivery:
- Clamping station.
- Clamping screws.
- Centring pin.
- Alignment pins.
- Push-in nuts.
- Eye bolts.
- Operating instructions.
Accessories:
- Guide pin for the UNILOCK modular system K0967.
- UNILOCK exchange pallets for zero-point clamping system K1218.
- UNILOCK protective pin for clamping modules K1010.
- UNILOCK protective cover for clamping modules K1010.
Technical data:
- Opening pressure: 6 bar, lubricated air.
- Air connection: G1/8.
- Repeat accuracy ≤0,005 mm.
- Concentricity <0,02 mm.
Drawing note:
1) Visual indication of the turbo function
Base plate, steel.
Clamping module in case-hardened steel.
Version:
Base plate, ground and oxidised on both sides.
Clamping module with hardened and polished functional surfaces.
Note:
Pre-assembled turning clamping stations with integrated UNILOCK ESM138-C clamping modules for turning and milling centres. Clamping stations make it possible to combine turning technology and stationary clamping technology. The clamping stations are fastened to the coordinate table using centring pins and sliding nuts.
The clamping modules are actuated centrally via a pneumatic connection.
The high clamping forces are generated by the integrated spring assembly (the unit is clamped without pressure). A visual indicator with an indicator pin shows that the turbo function is activated.
The release process is pneumatic.
With UNILOCK guide pins in combination with the clamping screws M10, M12, M16, the following holding forces are possible:
- Holding force (M10) 35.000 N/module
- Holding force (M12) 50.000 N/module
- Holding force (M16) 75.000 N/module
Holding force with cylinder head screw DIN EN ISO 4762-12.9.
The guide pins can only be fastened in conjunction with an exchange unit in the clamping module.
Operating mode:
K2351.320045075
Max. speed: 1400 1/min
K2351.520057079
Max. speed: 2000 1/min
Temperature range:
+5 °C to +60 °C.
On request:
Clamping station for special dimensions.
Scope of delivery:
- Clamping station.
- Clamping screws.
- Centring pin.
- Alignment pins.
- Push-in nuts.
- Eye bolts.
- Operating instructions.
Accessories:
- Guide pin for the UNILOCK modular system K0967.
- UNILOCK exchange pallets for zero-point clamping system K1218.
- UNILOCK protective pin for clamping modules K1010.
- UNILOCK protective cover for clamping modules K1010.
Technical data:
- Opening pressure: 6 bar, lubricated air.
- Air connection: G1/8.
- Repeat accuracy ≤0,005 mm.
- Concentricity <0,02 mm.
Drawing note:
1) Visual indication of the turbo function
| Material | Steel |
|---|---|
| Finishing | Oxidised |
| G | M12 |
|---|---|
| D4 | 340,26 |
| Versão 2 | quíntupla |
| Versão 1 | Unilock |
| Material dos componentes | aço de cementação |
| Denominação | Estação de fixação de torneamento |
| C1 | 72 |
| C2 | 9 |
| H | 79 |
| H1 | 40 |
| Superfície dos componentes | endurecida e polida |
| L2 | 180 |
| Forças de admissão com turbo kN | 140 |
| D6 | 20 |
| D1 | 520 |
| D2 | 50 |
| Tipo de forma | sem proteção contra torção |
| Largura de ranhura | 14 |
| D3 | 55 |
| D | 570 |
| H2 | 25 |
| H3 | 15 |
| L | 450 |
| H4 | 18 |
| L1 | 200 |
| C | 45 |
| L3 | 200 |
Product Variations
| Model | Material | Finishing | G | D4 | Versão 2 | Versão 1 | Material dos componentes | Denominação | C1 | C2 | H | H1 | Superfície dos componentes | L2 | Forças de admissão com turbo kN | D6 | D1 | D2 | Tipo de forma | Largura de ranhura | D3 | D | H2 | H3 | L | H4 | L1 | C | L3 | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2351.520057079 PAK2351.520057079 | Steel | Oxidised | M12 | 340,26 | quíntupla | Unilock | aço de cementação | Estação de fixação de torneamento | 72 | 9 | 79 | 40 | endurecida e polida | 180 | 140 | 20 | 520 | 50 | sem proteção contra torção | 14 | 55 | 570 | 25 | 15 | 450 | 18 | 200 | 45 | 200 | |||
PAK2351.520057079
Unilock vice clamping station, Quintuple without anti-twist protection, D=570, H=79, Oxidised steel, Components: steel
Material = Steel
Finishing = Oxidised
G = M12
D4 = 340,26
Versão 2 = quíntupla
Versão 1 = Unilock
Material dos componentes = aço de cementação
Denominação = Estação de fixação de torneamento
C1 = 72
C2 = 9
H = 79
H1 = 40
Superfície dos componentes = endurecida e polida
L2 = 180
Forças de admissão com turbo kN = 140
D6 = 20
D1 = 520
D2 = 50
Tipo de forma = sem proteção contra torção
Largura de ranhura = 14
D3 = 55
D = 570
H2 = 25
H3 = 15
L = 450
H4 = 18
L1 = 200
C = 45
L3 = 200