Double-T telescopic slide TA.43 930X43X44, Form A with threaded hole M08, S=966

Material:
Rail and slider in hardened bearing steel.
Balls in hardened bearing steel.
Ball cage in steel.
Version:
Rail, sliders and ball cage zinc-plated.
Induction-hardened guideways.
Hardened balls.
Order example:
K2018.1280530
Ordering note:
Sold individually.
Note:
Full extension consisting of two guide rails which, joined together, form a double-T profile, serving as the element
intermediate, as well as two sliding elements acting as fixed and movable element, forming the connection
for the adjacent structure. High strength and low deflection due to the compact design and square shape, in addition to the
high load capacity. The maximum stroke is greater than the closed length of the telescopic slide. The position of
installation should preferably be horizontal. To reach all fastening holes, it is necessary to remove during mounting
the locking screw positioned on the rail and reinsert it afterwards.
The double-sided stroke is achieved by removing the locking screws.

The internal stops serve to limit the cage.
In the loaded system, use external stops.

Form A:
Screws with strength class 10.9. must be used for mounting the rail
Form B:
Countersunk head screws according to DIN EN ISO 10642, with strength class 10.9., must be used for mounting the rail

The maximum travel speed is 0,8 m/s.

Application temperature from -30 °C to +170 °C.