PAK2461.16
Eccentric screw for clamping with notched ring TA.5 M16X30 case-hardened steel, Graphite RAL7021, With lever of
Estimated delivery: On request
Material:
Hardened steel eccentric clamping screw.
Knurled ring made of case-hardened steel.
Clamping lever in glass fibre reinforced high-performance thermoplastic.
Version:
Eccentric clamping screw, burnished.
Knurled ring, hardened and anodised.
Clamping lever grey-black RAL 7021.
Note:
Eccentric clamping screws with clamping levers can be used in various ways for tool-free clamping. Thanks to the integrated clamping lever, many elements can be fastened within seconds. The hardened serrated ring is suitable for clamping raw parts (castings and forgings).
Not designed for clamping hardened material with the specified torque. By using several cam clamps with clamping lever, even entire pallets can be equipped.
For clamping, clockwise rotation is recommended. The mark on the eccentric clamp must be on the right after tensioning. (Tighten the eccentric screw until it stops, then turn it back one revolution.)
"S" = distance from the workpiece to the thread centre (tension screw).
Mounting:
Clamping process:
1 Screw in the eccentric screw as far as the stop.
2. Then turn the eccentric screw back by one turn.
3. Insert the workpiece.
4. To clamp the workpiece, turn the eccentric screw clockwise. (The mark on the cam clamp must be on the right after tightening).
Hardened steel eccentric clamping screw.
Knurled ring made of case-hardened steel.
Clamping lever in glass fibre reinforced high-performance thermoplastic.
Version:
Eccentric clamping screw, burnished.
Knurled ring, hardened and anodised.
Clamping lever grey-black RAL 7021.
Note:
Eccentric clamping screws with clamping levers can be used in various ways for tool-free clamping. Thanks to the integrated clamping lever, many elements can be fastened within seconds. The hardened serrated ring is suitable for clamping raw parts (castings and forgings).
Not designed for clamping hardened material with the specified torque. By using several cam clamps with clamping lever, even entire pallets can be equipped.
For clamping, clockwise rotation is recommended. The mark on the eccentric clamp must be on the right after tensioning. (Tighten the eccentric screw until it stops, then turn it back one revolution.)
"S" = distance from the workpiece to the thread centre (tension screw).
Mounting:
Clamping process:
1 Screw in the eccentric screw as far as the stop.
2. Then turn the eccentric screw back by one turn.
3. Insert the workpiece.
4. To clamp the workpiece, turn the eccentric screw clockwise. (The mark on the cam clamp must be on the right after tightening).
| Material | Case-hardened steel |
|---|---|
| Color | RAL 7021 Graphite black |
| Thread | M16 |
| Tamanho | 5 |
|---|---|
| Versão 2 | com alavanca de aperto |
| Versão 1 | com anéis entalhados |
| Material dos componentes | aço temperado |
| Denominação | Parafuso excêntrico para fixação |
| H | 62,3 |
| Superfície dos componentes | brunido |
| H6 | 25,2 |
| D1 | 30,1 |
| A1 | 126,6 |
| A | 110,9 |
| B | 15,1 |
| S | 15 |
| H2 | 44,5 |
| H3 | 86,1 |
| Força de aperto kN | 2,8 |
| H4 | 92,4 |
| Binário de aperto máx. Nm | 17,1 |
| L | 30 |
| H5 | 12,7 |
| S1 (Curso) | 2,54 |
| X | M16 |
Product Variations
| Model | Material | Color | Thread | Tamanho | Versão 2 | Versão 1 | Material dos componentes | Denominação | H | Superfície dos componentes | H6 | D1 | A1 | A | B | S | H2 | H3 | Força de aperto kN | H4 | Binário de aperto máx. Nm | L | H5 | S1 (Curso) | X | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2461.12 PAK2461.12 | Case-hardened steel | RAL 7021 Graphite black | M12 | 4 | com alavanca de aperto | com anéis entalhados | aço temperado | Parafuso excêntrico para fixação | 53 | brunido | 20 | 25,4 | 110,3 | 96,8 | 14,1 | 12,7 | 37,6 | 72,3 | 1,7 | 78 | 15 | 25 | 9,5 | 2,03 | M12 | |||
| PAK2461.16 PAK2461.16 | Case-hardened steel | RAL 7021 Graphite black | M16 | 5 | com alavanca de aperto | com anéis entalhados | aço temperado | Parafuso excêntrico para fixação | 62,3 | brunido | 25,2 | 30,1 | 126,6 | 110,9 | 15,1 | 15 | 44,5 | 86,1 | 2,8 | 92,4 | 17,1 | 30 | 12,7 | 2,54 | M16 | |||
PAK2461.12
Eccentric screw for clamping with notched ring TA.4 M12X25 case-hardened steel, Graphite RAL7021, With lever of
Material = Case-hardened steel
Color = RAL 7021 Graphite black
Thread = M12
Tamanho = 4
Versão 2 = com alavanca de aperto
Versão 1 = com anéis entalhados
Material dos componentes = aço temperado
Denominação = Parafuso excêntrico para fixação
H = 53
Superfície dos componentes = brunido
H6 = 20
D1 = 25,4
A1 = 110,3
A = 96,8
B = 14,1
S = 12,7
H2 = 37,6
H3 = 72,3
Força de aperto kN = 1,7
H4 = 78
Binário de aperto máx. Nm = 15
L = 25
H5 = 9,5
S1 (Curso) = 2,03
X = M12
PAK2461.16
Eccentric screw for clamping with notched ring TA.5 M16X30 case-hardened steel, Graphite RAL7021, With lever of
Material = Case-hardened steel
Color = RAL 7021 Graphite black
Thread = M16
Tamanho = 5
Versão 2 = com alavanca de aperto
Versão 1 = com anéis entalhados
Material dos componentes = aço temperado
Denominação = Parafuso excêntrico para fixação
H = 62,3
Superfície dos componentes = brunido
H6 = 25,2
D1 = 30,1
A1 = 126,6
A = 110,9
B = 15,1
S = 15
H2 = 44,5
H3 = 86,1
Força de aperto kN = 2,8
H4 = 92,4
Binário de aperto máx. Nm = 17,1
L = 30
H5 = 12,7
S1 (Curso) = 2,54
X = M16