PAK1750.0503001
Fixed jaw ES for clamping system M SB=50 L=30, Form A smooth tool steel hardened and polished
Estimated delivery: On request
Material:
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The ES (stainless steel) fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved via the toothed surface by tightening the clamping screw. In this way, high clamping forces of the clamping elements can be achieved. Thanks to the narrow design of the fixed jaw in ES, it is particularly suitable for clamping smaller parts in larger quantities. This allows low-cost machining of even larger series.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of ES.
Clamping screw.
T-nuts.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The ES (stainless steel) fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved via the toothed surface by tightening the clamping screw. In this way, high clamping forces of the clamping elements can be achieved. Thanks to the narrow design of the fixed jaw in ES, it is particularly suitable for clamping smaller parts in larger quantities. This allows low-cost machining of even larger series.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of ES.
Clamping screw.
T-nuts.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
| Material | Tool steel |
|---|---|
| Finishing | Hardened and polished |
| L | 30 |
|---|---|
| H | 25 |
| H1 | 12,5 |
| B1 | 30 |
| Largura de ranhura | 5 |
| D1 | M6 |
| D Rosca fêmea | M5 |
| B | 50 |
| Forma | A |
| Versão 1 | para sistema de fixação múltiplo |
| Denominação | Mordente fixo de ES |
| D3 | M10x30 |
| Tipo de forma | liso |
| Adequado para larguras de sistemas | 50 |
Product Variations
| Model | Material | Finishing | B2 | L | H | H1 | B1 | Largura de ranhura | D1 | D Rosca fêmea | B | Forma | Versão 1 | Denominação | D3 | Tipo de forma | Adequado para larguras de sistemas | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1750.0503001 PAK1750.0503001 | Tool steel | Hardened and polished | - | 30 | 25 | 12,5 | 30 | 5 | M6 | M5 | 50 | A | para sistema de fixação múltiplo | Mordente fixo de ES | M10x30 | liso | 50 | |||
| PAK1750.0724001 PAK1750.0724001 | Tool steel | Hardened and polished | - | 40 | 40 | 21,5 | 44 | 8 | M6 | M6 | 72 | A | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | liso | 72 | |||
| PAK1750.1004401 PAK1750.1004401 | Tool steel | Hardened and polished | 26 | 44 | 43 | 22 | 64 | 10 | M8 | M8 | 100 | A | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | liso | 100 | |||
PAK1750.0503001
Fixed jaw ES for clamping system M SB=50 L=30, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
L = 30
H = 25
H1 = 12,5
B1 = 30
Largura de ranhura = 5
D1 = M6
D Rosca fêmea = M5
B = 50
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M10x30
Tipo de forma = liso
Adequado para larguras de sistemas = 50
PAK1750.0724001
Fixed jaw ES for clamping system M SB=72 L=40, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
L = 40
H = 40
H1 = 21,5
B1 = 44
Largura de ranhura = 8
D1 = M6
D Rosca fêmea = M6
B = 72
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = liso
Adequado para larguras de sistemas = 72
PAK1750.1004401
Fixed jaw ES for clamping system M SB=100 L=44, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
B2 = 26
L = 44
H = 43
H1 = 22
B1 = 64
Largura de ranhura = 10
D1 = M8
D Rosca fêmea = M8
B = 100
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = liso
Adequado para larguras de sistemas = 100