PAK0056.0250
Standard toggle clamp steel, Vertical base, Components: plastic, Orange, M=M08X60
Estimated delivery: On request
Material:
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0056.0150
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In version K0056.0150, a neoprene plunger is included in the scope of delivery.
Accessories:
K0100
K0101
K0102
K0103
K0106
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0056.0150
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In version K0056.0150, a neoprene plunger is included in the scope of delivery.
Accessories:
K0100
K0101
K0102
K0103
K0106
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
| Material | Steel |
|---|---|
| Finishing | Galvanised and chrome-plated |
| C | 37 |
|---|---|
| C2 | 7 |
| Ângulo de abertura braço de fixação na posição 1 | 95° |
| Ângulo de abertura cabo em posição 2 | 85° |
| C1 | 21,5 |
| H | 190 |
| Ângulo de abertura braço de fixação sem batente | 160° |
| D | 7,1 |
| Ângulo de abertura cabo sem batente | 100° |
| B1 | 6 |
| L | 87 |
| Força manual FH N | 190 |
| Força de retenção F1 N | 2500 |
| A1 | 35 |
| M | M8x60 |
| A | 19 |
| L1 | 45 |
| B | 12 |
| B2 | 26 |
| Força de tensão F3 N | 1150 |
| Ângulo de abertura braço de fixação na posição 2 | 125° |
| Ângulo de abertura cabo em posição 1 | 70° |
| A2 | 8 |
| Versão 1 | Padrão |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base vertical |
| Tipo de produto | eixo de aperto fixo |
