PAK0058.0075
Toggle clamp, Horizontal base, Standard, F2=1100, Adjustable clamping shaft M05X35, Zinc-plated and passivated steel
Estimated delivery: On request
Material:
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
| Material | Steel |
|---|---|
| Finishing | Zinc-plated and passivated |
| Força manual FH N | 80 |
|---|---|
| A2 | 5 |
| A | 16 |
| Força de tensão F4 N | 750 |
| A1 | 25 |
| L | 57 |
| C1 | 9 |
| D | 4,4 |
| B | 24 |
| C | 16 |
| B3 | 5,5 |
| L1 | 32 |
| B1 | 34 |
| Força de retenção F1 N | 700 |
| F2 | 1100 |
| Ângulo de abertura cabo em posição 1 | 90° |
| Força de tensão F3 N | 500 |
| Ângulo de abertura cabo sem batente | 100° |
| H | 94 |
| Ângulo de abertura braço de fixação na posição 1 | 130° |
| M | M5x35 |
| Ângulo de abertura braço de fixação sem batente | 160° |
| Versão 1 | Padrão |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base horizontal |
| Tipo de produto | eixo de aperto regulável |
