Telescopic slide L=300 12, 7X26, 3, Partial extension S=308, Fp=32, Zinc-plated steel, Lateral mounting, 1

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Order example:
K2380-0200
Ordering note:
Sold in pairs.
Note:
In telescopic slides with full extension, the stroke is almost the same as the mounting length, ensuring greater comfort and accessibility. Latching in closed position.
In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 80.000 cycles.

Not suitable for horizontal mounting.

To avoid the risk of collision with other parts, the head height of the fastening screws must not exceed 2 mm.
Advantages:
Latching in closed position
Low rail height
Smooth operation
Drawing note:
1) Mounting hole for K2380.0300 not present
2) Mounting hole for K2380.0400 present
3) Mounting hole for K2380.10-0400 not present
4) Mounting hole for K2380.0150 not present