Telescopic slide L=300 12, 7X45, 7, Full extension S=305, Fp2=42, Fp1=48, Style C, Zinc-plated steel, Mounting

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Ordering note:
Sold in pairs.
Note:
In telescopic slides with full extension, the stroke is almost the same as the mounting length, ensuring greater comfort and accessibility. The drawer can be easily removed and separated from the slides by actuating the release lever. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically.

Not suitable for horizontal mounting.

To avoid the risk of collision with other parts, the head height of the fastening screws must not exceed 2,5 mm.

Form A:
During the closing process, the damping mechanism acts on the retracting movement of the slides, automatically moving the cushioned slide to the end position.
The specified load capacities refer to the maximum value at 80.000 cycles.

Form B:
When light pressure is applied, the telescopic slides extend automatically and almost silently. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 80.000 cycles.

Form C:
Latching in open and closed positions.
The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 10.000 or 80.000 cycles.

Form D:
Latching in closed position.
The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 80.000 cycles.

Form E:
During the closing process, the movement is cushioned and travels automatically to the end position.
The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 10.000 or 80.000 cycles.
Temperature range:
Form A:
+10°C to +40°C.

Form B:
-20°C to +70°C.

Form C:
-20°C to +70°C.

Form D:
-20°C to +70°C.
Advantages:
Soft close
Push to open
Automatic closing
Latching in open and closed positions
Quick removal of the front part
Accessories:
Structural steel angle brackets for mounting telescopic slides K2393
Drawing note:
Form B:
1) Mounting hole for K2381.2040022, K2381.2050022,
K2381.2060022, K2381.2040035, K2381.2050035 and K2381.2060035 not available

Form C:
1) Mounting hole for K2381.30600, K2381.30650 and K2381.30700 available
2) Mounting hole for K2381.30250 not available

Form D:
1) Mounting hole for K2381.40148, K2381.40199
and K2381.40250 not available
2) Mounting hole for K2381.40600, K2381.40650
and K2381.40700 available
3) Mounting hole for K2381.30600 and K2381.30650 not available

Form E:
1) Mounting hole for K2381.5040027, K2381.5050027, K2381.5040041 and K2381.5050041 not available