PAK2612.0400
Telescopic slide L=400 26, 5X80, Full extension on both sides S=400, Fp=210, Silver anodised aluminium, Components: steel
Estimated delivery: On request
Material:
Aluminium rails.
Ball cage and balls in steel.
Ordering note:
Sold in pairs.
Note:
With telescopic slides with full extension on both sides, the stroke is approximately equal to the installation length. This ensures greater comfort and accessibility. The dynamic load capacity indicates the maximum load that a pair of vertically mounted telescopic slides can support when the full extension stroke is used. The stated load capacities were determined with a rail spacing of 600 mm.
For ideal clamping, all clamping points must be used.
The rails are not suitable for horizontal mounting.
After 2.000 cycles, it is recommended to relubricate with high-pressure grease.
End stops have been tested at the stated load capacity, with ten cycles and an impact speed of 0,8 m/s. The use of external end stops is also recommended.
Temperature range:
-20 °C to +70 °C.
Aluminium rails.
Ball cage and balls in steel.
Ordering note:
Sold in pairs.
Note:
With telescopic slides with full extension on both sides, the stroke is approximately equal to the installation length. This ensures greater comfort and accessibility. The dynamic load capacity indicates the maximum load that a pair of vertically mounted telescopic slides can support when the full extension stroke is used. The stated load capacities were determined with a rail spacing of 600 mm.
For ideal clamping, all clamping points must be used.
The rails are not suitable for horizontal mounting.
After 2.000 cycles, it is recommended to relubricate with high-pressure grease.
End stops have been tested at the stated load capacity, with ten cycles and an impact speed of 0,8 m/s. The use of external end stops is also recommended.
Temperature range:
-20 °C to +70 °C.
| Material | Aluminum |
|---|---|
| Color | Silver |
| Finishing | Anodised |
| Assembly Style | Side mounting |
| Versão 1 | Extensão total em ambos os lados |
|---|---|
| Material dos componentes | aço inoxidável |
| Denominação | Calha telescópica |
| H | 80 |
| Tipo de produto | padrão |
| Tipo de embalagem | 1 peça = 1 par |
| A | 385 |
| A1 | 117,5 |
| Curso S | 400 |
| Código do artigo do fabricante | DA4165-0040 |
| B | 26,5 |
| L | 400 |
| L1 | 422 |
| A2 | 75 |
| Capacidade de carga por par kg | 210 |
