Telescopic slide L=450 19, 1X53, Full extension S=473, Fp=90, Style A, Zinc-plated steel, Components: steel, Mounting

Material:
Steel rails.
Ball cages in steel.
Stainless steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Ordering note:
Sold in pairs.
Note:
With telescopic slides with full extension, the stroke corresponds approximately to the installation length. This ensures greater comfort and accessibility. By actuating the release lever, the drawer can be easily removed and separated from the guide. The dynamic load capacity indicates the maximum load that a pair of vertically mounted telescopic slides can support when the full extension stroke is used. The stated load capacities were determined with a rail spacing of 450 mm and refer to the maximum value after 80.000 cycles.

Telescopic slides are not suitable for horizontal mounting.

The installation width between the body and the drawer must be 19,1 mm +0,2 mm to +0,5 mm for the rail thickness.

It is recommended to fasten the telescopic slide with a countersunk screw M5 or a 6 mm countersunk screw (Euro).

Form B is equipped with a damped self-closing system, known as the soft close damping system. In the last 45 mm before the closed position, the slides return automatically and in a cushioned manner to their original position.
Temperature range:
-20 °C to +70 °C.