Telescopic slide L=450, Partial extension S=331, 7, Fp2=20, Zinc-plated steel, Lateral mounting, 1

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Order example:
K2089.0250
Ordering note:
Sold in pairs.
Note:
In telescopic slides with partial extension, the stroke is shorter than the mounting length. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a pair of telescopic slides mounted vertically. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 80.000 cycles.

In horizontal mounting, the load capacity is 75% lower.

The head height of the clamping screws must not exceed 2,5 mm, to avoid the risk of collision with other parts of the rails.
Temperature range:
-20 °C - +70 °C.