Telescopic slide L=500 19, 1X35, 3, Full extension S=501, Fp2=57, Fp1=75, Untreated stainless steel, Mounting

Material:
Rails in stainless steel 1.4301.
Ball cages in stainless steel 1.4301.
Balls in stainless steel 1.4034.

Version:
Rails with untreated surface.
Ball cages with untreated surface.
Balls with untreated surface.
Order example:
K1715.0350
Ordering note:
Sold in pairs.
Note:
In telescopic slides with full extension, the stroke is similar to the mounting length, ensuring greater comfort and accessibility. Latching in closed position. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 10.000 or 80.000 cycles.

In horizontal mounting, the value decreases by 75%.

To avoid the risk of collision with other parts, the head height of the fastening screws must not exceed 2,5 mm.
Advantages:
Latching in closed position
Suitable for flat mounting
Smooth operation