Telescopic slide L=500 26, 5X80, Full extension S=500, Fp=300, Untreated aluminium, Lateral mounting, 1

Material:
Aluminium rails.
Ball cage in stainless steel 1.4301.
Balls in stainless steel 1.4021.

Version:
Rails with untreated surface.
Ball cages with untreated surface.
Balls with untreated surface.
Order example:
K1721.0350
Ordering note:
Sold in pairs.
Note:
In telescopic slides with full extension, the stroke is almost the same as the mounting length, ensuring greater comfort and accessibility. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities were calculated with a rail spacing of 600 mm and refer to the maximum value at 10.000 cycles.

Not suitable for horizontal mounting.

Lubrication with high-pressure grease recommended after 2.000 cycles.

End stops are tested at the stated load capacity for 10 cycles and at a speed of 0,8 m/s.
The addition of external end stops is recommended.
Temperature range:
-20 C to +110 °C.