Telescopic slide L=550 12, 7X35, Partial extension S=415, Fp2=33, Fp1=42, Style A, Zinc-plated steel, Mounting

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Ordering note:
Sold in pairs.
Note:
In telescopic slides with partial extension, the stroke is shorter than the mounting length. Latching in closed position. The drawer can be easily removed and separated from the slides by actuating the release lever. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The stated load capacities refer to the maximum value at 10.000 or 80.000 cycles.

Not suitable for horizontal mounting.

To avoid the risk of collision with other parts, the head height of the fastening screws must not exceed 2,5 mm.

Form B:
Additionally available with detent in the open position.
Advantages:
Latching in open and closed positions
Quick removal of the front part
Smooth operation
Accessories:
Structural steel angle brackets for mounting telescopic slides K2393
Drawing note:
1) Mounting hole for K2383.10250 and K2383.20250 not available