Telescopic slide L=610 19, 1X35, 3, Over-extension S=632, Fp=50, Zinc-plated steel, Lateral mounting, 1

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Order example:
K2389.0356
Ordering note:
Sold in pairs.
Note:
In telescopic slides with over-extension, the stroke is greater than the mounting length.
In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 10.000 cycles.

In horizontal mounting, the value decreases by 75%.

To avoid collision with other parts, the head height of the fastening screws must not exceed 2,5 mm.
Temperature range:
-20 °C - +70 °C.
Advantages:
Suitable for flat mounting
Easy assembly
High lateral stability due to precise guidance