Telescopic slide L=660, 4 19, 1X76, 2, Full extension S=660, 4, Fp=264, Style B, Zinc-plated steel, Mounting

Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Order example:
1 Pair (two-sided locking): K1719.****0 (left) & K1719.****1 (right)
1 Pair (one-sided locking): K1719.****0 (left) or K1719.****1 (right) & K1720.****
Ordering note:
Sold individually.
Note:
In telescopic slides with full extension, the stroke is almost the same as the mounting length, ensuring greater comfort and accessibility. Latching in open and closed positions. The telescopic slide can only be opened or closed by actuating the release lever. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities refer to the maximum value at 10.000 cycles.

Not suitable for horizontal mounting.

To avoid collision with other parts, the head height of the fastening screws must not exceed 4,8 mm.

Telescopic slides cannot be ordered in pairs.
When selecting locking on both sides, one left-hand and one right-hand version must be ordered in each case.
When selecting locking on one side only, a combination with article K1720. is possible
Advantages:
Latching in open and closed positions
For applications with heavy loads
Manual release
Smooth operation
Accessories:
Telescopic slides in steel K1720.
Observe:
The maximum load capacity refers to the pair of telescopic slides.
Drawing note:
1) Mounting hole not available on items K1719.03050 and K1719.03051
2) Mounting hole not available on items K1719.05590 and K1719.05591
3) Cut-out for carriage bolt
4) Reference dimension only, not a mounting hole
5) Form B, dimensions identical to the right-hand version