PAK2611.0700
Telescopic slide L=700 38, 2X53, 1, Over-extension S=1046, Zinc-plated steel, Components: steel, Mounting
Estimated delivery: On request
Material:
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Ordering note:
Sold in pairs.
Note:
With telescopic slides with over-extension, the stroke is greater than the installation length.
The dynamic load capacity of the telescopic slides indicates the maximum load supported by a pair of vertically mounted telescopic slides when the full extension stroke is used. The stated load capacities were determined with a rail spacing of 450 mm and refer to the maximum value after 20.000 cycles.
Telescopic slides are not suitable for horizontal mounting.
The installation width between the body and the drawer must be 38,2 mm +0,2 mm to +0,5 mm for the rail thickness.
It is recommended to fasten the telescopic slides with a countersunk screw M5.
Temperature range:
-20 °C to +70 °C.
Steel rails.
Ball cages in steel.
Steel balls.
Version:
Zinc-plated rails.
Zinc-plated ball cages.
Hardened balls.
Ordering note:
Sold in pairs.
Note:
With telescopic slides with over-extension, the stroke is greater than the installation length.
The dynamic load capacity of the telescopic slides indicates the maximum load supported by a pair of vertically mounted telescopic slides when the full extension stroke is used. The stated load capacities were determined with a rail spacing of 450 mm and refer to the maximum value after 20.000 cycles.
Telescopic slides are not suitable for horizontal mounting.
The installation width between the body and the drawer must be 38,2 mm +0,2 mm to +0,5 mm for the rail thickness.
It is recommended to fasten the telescopic slides with a countersunk screw M5.
Temperature range:
-20 °C to +70 °C.
| Material | Steel |
|---|---|
| Finishing | Zinc-plated |
| Assembly Style | Side mounting |
| A6 | 256 |
|---|---|
| L | 700 |
| A4 | 576 |
| H | 53,1 |
| A2 | 320 |
| A3 | 544 |
| A1 | 288 |
| A5 | 608 |
| Curso S | 1046 |
| A | 26 |
| Capacidade de carga por par kg | 100 |
| B | 38,2 |
| Versão 1 | Extensão excedente |
| Material dos componentes | aço |
| Denominação | Calha telescópica |
| Tipo de produto | padrão |
| Superfície dos componentes | endurecido |
| A7 | 544 |
| Tipo de embalagem | 1 peça = 1 par |
| Código do artigo do fabricante | DZ5351-0070 |
