Telescopic slide L=790 19, 1X53, Full extension S=800, Fp2=90, Untreated stainless steel, Mounting

The slide can support loads of up to 90 kg and is made of high-quality stainless steel, which makes it ideal for corrosive environments. The damped self-closing mechanism (soft close) ensures a controlled and smooth closing movement. The full extension of the slide allows unrestricted access to the contents of the drawer and is therefore particularly suitable for sensitive items and noise-sensitive environments such as pharmacies and homes. The front quick-release facilitates installation and maintenance, making the slide functional and easy to use.
Material:
Rails in stainless steel 1.4301.
Ball cages in stainless steel 1.4301.
Balls in stainless steel 1.4034.

Version:
Rails with untreated surface.
Ball cages with untreated surface.
Balls with untreated surface.
Ordering note:
Sold in pairs.
Note:
In telescopic slides with full extension, the stroke is almost the same as the mounting length, ensuring greater comfort and accessibility. The drawer can be easily removed and separated from the guide by actuating the release lever. When pushing the inner slide back in, the centre slide must be in the retracted position. The required force must be applied evenly. The retraction damping system damps the telescopic slides on closing, and they move automatically to the end position. In an application with full extension stroke, the dynamic load capacity of the telescopic slides specifies the maximum load-bearing capacity of a telescopic pair mounted vertically. The specified load capacities were calculated with a rail spacing of 450 mm and refer to the maximum value at 80.000 cycles.

Not suitable for horizontal mounting.
Temperature range:
0 °C to +40 °C.
Advantages:
Soft close
Automatic closing
Quick removal of the front part
Accessories:
K2096 Mounting angle brackets in stainless steel for telescopic slides.