PAK2453.40150
Telescopic slide over-extension 150X9, 7X15, 5, Style D, Stainless steel, Untreated, S=177
Estimated delivery: On request
Material:
Rail and ball cage in stainless steel 1.4301.
Form A and C:
Steel balls.
Form B and D:
Balls in stainless steel 1.4125.
Version:
Rails with untreated surface.
Hardened balls.
Ordering note:
Sold individually.
Note:
For over-extension telescopic slides, the stroke is greater than the installation length. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a pair of vertically mounted telescopic slides when the full extension stroke is used.
The specified load capacities refer to the maximum value at 50.000 cycles.
When mounted horizontally, the load capacity is 75 % lower.
The head height of the clamping screws must not exceed 0,9 mm, otherwise there is a risk of collision with other parts of the linear ball bearing.
Form A: lubricated, with bores.
Type B: with food-grade lubricant, with holes.
Form C: lubricated, with thread.
Form D: with food-grade lubricant, with thread.
A lubricant (NSF H1) suitable for the food industry is used.
Recommended screws: M 2.6.
Maximum screw length = plate thickness + 1,7 mm.
Temperature range:
5 °C a 35 °C
Advantages:
Smooth operation
High lateral stability thanks to precise guidance
Drawing note:
1) In this case, the rail of 80 mm length has no hole
Rail and ball cage in stainless steel 1.4301.
Form A and C:
Steel balls.
Form B and D:
Balls in stainless steel 1.4125.
Version:
Rails with untreated surface.
Hardened balls.
Ordering note:
Sold individually.
Note:
For over-extension telescopic slides, the stroke is greater than the installation length. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a pair of vertically mounted telescopic slides when the full extension stroke is used.
The specified load capacities refer to the maximum value at 50.000 cycles.
When mounted horizontally, the load capacity is 75 % lower.
The head height of the clamping screws must not exceed 0,9 mm, otherwise there is a risk of collision with other parts of the linear ball bearing.
Form A: lubricated, with bores.
Type B: with food-grade lubricant, with holes.
Form C: lubricated, with thread.
Form D: with food-grade lubricant, with thread.
A lubricant (NSF H1) suitable for the food industry is used.
Recommended screws: M 2.6.
Maximum screw length = plate thickness + 1,7 mm.
Temperature range:
5 °C a 35 °C
Advantages:
Smooth operation
High lateral stability thanks to precise guidance
Drawing note:
1) In this case, the rail of 80 mm length has no hole
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| Assembly Style | Side mounting |
| A6 | 126 |
|---|---|
| L | 150 |
| A4 | 63 |
| H | 15,5 |
| A2 | 112 |
| A3 | 126 |
| A1 | 63 |
| A5 | 116 |
| Curso S | 177 |
| A | 12 |
| Capacidade de carga por par kg | 12 |
| B | 9,7 |
| Forma | D |
| Versão 1 | Extensão excedente |
| Denominação | Calha telescópica |
| Tipo de produto | padrão |
