PAK2452.0100
Telescopic slide partial extension on both sides 100X6X16, Silver aluminium, Anodised, S=40
Estimated delivery: On request
Material:
Aluminium rails.
Ball cage and balls in steel.
Version:
Rails anodised in silver.
Zinc-plated ball cage.
Hardened balls.
Ordering note:
Sold individually.
Note:
For partial-extension telescopic slides, the stroke is less than the installation length. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a pair of vertically mounted telescopic slides when the full extension stroke is used.
The specified load capacities refer to the maximum value at 50.000 cycles.
When mounted horizontally, the load capacity is approximately 60 % lower.
The head height of the clamping screws must not exceed 0,9 mm, otherwise there is a risk of collision with other parts of the linear ball bearing.
Recommended screws: M 2.5.
Maximum screw length = plate thickness + 2,2 mm.
Temperature range:
5 °C a 35 °C
Advantages:
Smooth operation
High lateral stability thanks to precise guidance
Drawing note:
1) In this case, the rail of 70 mm length has no hole
Aluminium rails.
Ball cage and balls in steel.
Version:
Rails anodised in silver.
Zinc-plated ball cage.
Hardened balls.
Ordering note:
Sold individually.
Note:
For partial-extension telescopic slides, the stroke is less than the installation length. The dynamic load capacity of the telescopic slides indicates the maximum load capacity of a pair of vertically mounted telescopic slides when the full extension stroke is used.
The specified load capacities refer to the maximum value at 50.000 cycles.
When mounted horizontally, the load capacity is approximately 60 % lower.
The head height of the clamping screws must not exceed 0,9 mm, otherwise there is a risk of collision with other parts of the linear ball bearing.
Recommended screws: M 2.5.
Maximum screw length = plate thickness + 2,2 mm.
Temperature range:
5 °C a 35 °C
Advantages:
Smooth operation
High lateral stability thanks to precise guidance
Drawing note:
1) In this case, the rail of 70 mm length has no hole
| Material | Aluminum |
|---|---|
| Color | Silver |
| Finishing | Anodised |
| Assembly Style | Side mounting |
| L | 100 |
|---|---|
| A4 | 76 |
| H | 16 |
| A2 | 76 |
| A3 | 38 |
| A1 | 38 |
| Curso S | 40 |
| A | 12 |
| Capacidade de carga por par kg | 5 |
| B | 6 |
| Versão 1 | extensão parcial em ambos os lados |
| Denominação | Calha telescópica |
| Tipo de produto | padrão |
