PAK2019.350370
Telescopic slide TA.35 370X35X34, Hardened bearing steel, S=406
Estimated delivery: On request
Material:
Rail and slider in hardened bearing steel.
Balls in hardened bearing steel.
Ball cage in steel.
Version:
Rail, sliders and ball cage zinc-plated.
Induction-hardened guideways.
Hardened balls.
Order example:
K2019.350450
Ordering note:
Sold individually.
Note:
Full extension consisting of two guide rails, acting as the fixed and the moving element, and two sliding elements which, joined together, form the intermediate element.
This arrangement gives open ball cages good protection against dirt. The maximum stroke is greater than the closed length of the telescopic slide. The mounting position should preferably be horizontal. To reach all fastening holes, it is necessary to remove the locking screw positioned on the rail during mounting and to reinsert it afterwards.
The double-sided stroke is achieved by removing the locking screws.
The internal stops serve to limit the cage.
In the loaded system, use external stops.
Countersunk head screws, according to DIN EN ISO 10642, with strength class 10.9., must be used for mounting the rail
The maximum travel speed is 0,8 m/s.
Application temperature from -30 °C to +170 °C.
Rail and slider in hardened bearing steel.
Balls in hardened bearing steel.
Ball cage in steel.
Version:
Rail, sliders and ball cage zinc-plated.
Induction-hardened guideways.
Hardened balls.
Order example:
K2019.350450
Ordering note:
Sold individually.
Note:
Full extension consisting of two guide rails, acting as the fixed and the moving element, and two sliding elements which, joined together, form the intermediate element.
This arrangement gives open ball cages good protection against dirt. The maximum stroke is greater than the closed length of the telescopic slide. The mounting position should preferably be horizontal. To reach all fastening holes, it is necessary to remove the locking screw positioned on the rail during mounting and to reinsert it afterwards.
The double-sided stroke is achieved by removing the locking screws.
The internal stops serve to limit the cage.
In the loaded system, use external stops.
Countersunk head screws, according to DIN EN ISO 10642, with strength class 10.9., must be used for mounting the rail
The maximum travel speed is 0,8 m/s.
Application temperature from -30 °C to +170 °C.
| Material | Hardened bearing steel |
|---|
| D para parafuso | M6 |
|---|---|
| B | 35 |
| Quantidade de furos | 5 |
| H | 34 |
| L | 370 |
| C0Z N | 522 |
| C0Y N | 522 |
| R | 2 |
| Tamanho | 35 |
| Denominação | Calha telescópica |
| Curso S | 406 |
