PAK1463.10610011
Horizontal toggle clamp with safety latch and S D=M06, F4=1200, C1=MÁX. 16, 4, Stainless steel, Components: steel
Estimated delivery: On request
Material:
Quick-action clamps in stainless steel.
Handle element in polyamide.
Release strap in TPE.
Stainless steel force sensor.
Stainless steel housing for the electronics.
Stainless steel spacer bush.
Stainless steel threaded pin.
Thermoplastic protective tip.
Version:
Stainless steel parts with untreated surface.
Black protective tip.
Order example:
K1463.10610011
Note:
incl. 1 set of clamping tension adjustment keys K1464
Application:
Quick-action clamps are used for holding and clamping workpieces. They serve as mounting and support devices.
The quick clamp with force sensor allows the clamping force to be measured and adjusted. In this way, workpieces can be clamped in a defined and traceable manner.
The clamping tension adjusting key is used to set the clamping force. The tension adjusting keys are available in different heights for different workpiece thicknesses.
Accessories:
K1464
Technical data:
Force sensor:
Nominal force Fnom: clamping force F4
Calibration range: 0 - clamping force F4
Overall system accuracy: 5% Fnom
Force limit FL: 120% Fnom
Breaking force FB:> 200% Fnom
Nominal temperature range BT, nom.: -20 - +60 °C
Amplifier electronics:
Operating voltage: 10 - 30 V DC
Output signal (nominal characteristic) Cnom: 4 - 20 mA 3 conductors
Permissible load: <(Ub-10V)/0.024 A
Electrical connection: M12x1
Wiring:
1: UB+
2: -
3: 0V / S-
4: S+
Protection class: IP66
Drawing note:
1) Clamping tension adjustment key K1464
Quick-action clamps in stainless steel.
Handle element in polyamide.
Release strap in TPE.
Stainless steel force sensor.
Stainless steel housing for the electronics.
Stainless steel spacer bush.
Stainless steel threaded pin.
Thermoplastic protective tip.
Version:
Stainless steel parts with untreated surface.
Black protective tip.
Order example:
K1463.10610011
Note:
incl. 1 set of clamping tension adjustment keys K1464
Application:
Quick-action clamps are used for holding and clamping workpieces. They serve as mounting and support devices.
The quick clamp with force sensor allows the clamping force to be measured and adjusted. In this way, workpieces can be clamped in a defined and traceable manner.
The clamping tension adjusting key is used to set the clamping force. The tension adjusting keys are available in different heights for different workpiece thicknesses.
Accessories:
K1464
Technical data:
Force sensor:
Nominal force Fnom: clamping force F4
Calibration range: 0 - clamping force F4
Overall system accuracy: 5% Fnom
Force limit FL: 120% Fnom
Breaking force FB:> 200% Fnom
Nominal temperature range BT, nom.: -20 - +60 °C
Amplifier electronics:
Operating voltage: 10 - 30 V DC
Output signal (nominal characteristic) Cnom: 4 - 20 mA 3 conductors
Permissible load: <(Ub-10V)/0.024 A
Electrical connection: M12x1
Wiring:
1: UB+
2: -
3: 0V / S-
4: S+
Protection class: IP66
Drawing note:
1) Clamping tension adjustment key K1464
| Material | Stainless steel |
|---|---|
| Thread | M6 |
| Cor dos componentes | grafite RAL 7021 |
|---|---|
| Versão 1 | com trinco de segurança e sensor de força |
| Material dos componentes | aço inoxidável |
| Força de retenção F1 N | 1350 |
| Denominação | Grampo rápido |
| Força de tensão F4 N | 1200 |
| C1 | máx. 16,4 |
| Força de retenção F2 N | 1900 |
| Força de tensão F3 N | 720 |
| Ângulo de abertura braço de fixação | 86° |
| Ângulo de abertura cabo | 67° |
| H | 90,2 |
| H1 | 86,1 |
| Sinal de saída | 4-20mA |
| L2 | 94 |
| B1 | 53,4 |
| D1 | 17 |
| SW2 | 3 |
| A | 26 |
| D2 | M12x1 |
| A1 | 10 |
| Força manual FH N | 160 |
| Tipo de cabo para grampos rápidos | horizontal |
| B | 26 |
| B2 | 45 |
| H2 | 30 |
| D | M6 |
| L | 193,6 |
| L1 | 60 |
| C | 51,9 |
| A2 | 5,5 |
| SW1 | 11 |
