PAK1463.00610311
Horizontal toggle clamp with safety latch and S D=M06, F4=1200, C1=MÁX. 16, 4, Steel, Components: stainless steel red
Estimated delivery: On request
Material:
Quick-action clamps in steel.
Handle element in polyamide.
Release strap in TPE.
Stainless steel force sensor.
Stainless steel housing for the electronics.
Stainless steel spacer bush.
Stainless steel threaded pin.
Thermoplastic protective tip
Version:
Quick-action clamps, carbonitrided and black oxidised.
Stainless steel parts with untreated surface.
Black protective tip.
Order example:
K1463.00610011
Note:
incl. 1 set of clamping tension adjustment keys K1464
Application:
Quick-action clamps are used for holding and clamping workpieces. They serve as mounting and support devices.
The quick clamp with force sensor allows the clamping force to be measured and adjusted. In this way, workpieces can be clamped in a defined and traceable manner.
The clamping tension adjusting key is used to set the clamping force. The tension adjusting keys are available in different heights for different workpiece thicknesses.
Accessories:
K1464
Technical data:
Force sensor:
Nominal force Fnom: clamping force F4
Calibration range: 0 - clamping force F4
Overall system accuracy: 5% Fnom
Force limit FL: 120% Fnom
Breaking force FB:> 200% Fnom
Nominal temperature range BT, nom.: -20 - +60 °C
Amplifier electronics:
Operating voltage: 10 - 30 V DC
Output signal (nominal characteristic) Cnom: 4 - 20 mA 3 conductors
Permissible load:
Quick-action clamps in steel.
Handle element in polyamide.
Release strap in TPE.
Stainless steel force sensor.
Stainless steel housing for the electronics.
Stainless steel spacer bush.
Stainless steel threaded pin.
Thermoplastic protective tip
Version:
Quick-action clamps, carbonitrided and black oxidised.
Stainless steel parts with untreated surface.
Black protective tip.
Order example:
K1463.00610011
Note:
incl. 1 set of clamping tension adjustment keys K1464
Application:
Quick-action clamps are used for holding and clamping workpieces. They serve as mounting and support devices.
The quick clamp with force sensor allows the clamping force to be measured and adjusted. In this way, workpieces can be clamped in a defined and traceable manner.
The clamping tension adjusting key is used to set the clamping force. The tension adjusting keys are available in different heights for different workpiece thicknesses.
Accessories:
K1464
Technical data:
Force sensor:
Nominal force Fnom: clamping force F4
Calibration range: 0 - clamping force F4
Overall system accuracy: 5% Fnom
Force limit FL: 120% Fnom
Breaking force FB:> 200% Fnom
Nominal temperature range BT, nom.: -20 - +60 °C
Amplifier electronics:
Operating voltage: 10 - 30 V DC
Output signal (nominal characteristic) Cnom: 4 - 20 mA 3 conductors
Permissible load:
| Material | Steel |
|---|---|
| Thread | M6 |
| Cor dos componentes | vermelho RAL 3020 |
|---|---|
| Versão 1 | com trinco de segurança e sensor de força |
| Material dos componentes | aço inoxidável |
| Força de retenção F1 N | 1350 |
| Denominação | Grampo rápido |
| Força de tensão F4 N | 1200 |
| C1 | máx. 16,4 |
| Força de retenção F2 N | 1900 |
| Força de tensão F3 N | 720 |
| Ângulo de abertura braço de fixação | 86° |
| Ângulo de abertura cabo | 67° |
| H | 90,2 |
| H1 | 86,1 |
| Sinal de saída | 4-20mA |
| L2 | 94 |
| B1 | 53,4 |
| D1 | 17 |
| SW2 | 3 |
| A | 26 |
| D2 | M12x1 |
| A1 | 10 |
| Força manual FH N | 160 |
| Tipo de cabo para grampos rápidos | horizontal |
| B | 26 |
| B2 | 45 |
| H2 | 30 |
| D | M6 |
| L | 193,6 |
| L1 | 60 |
| C | 51,9 |
| A2 | 5,5 |
| SW1 | 11 |
