PAK0060.0300
Toggle clamp, Horizontal base, Standard, F1=3000, Fixed clamping shaft M08X60, Zinc-plated and passivated steel
Estimated delivery: On request
Material:
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0060.0250
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0060.0100 and K0060.0150, a neoprene plunger is included in the scope of delivery.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
Drawing note:
1) Load 1
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0060.0250
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0060.0100 and K0060.0150, a neoprene plunger is included in the scope of delivery.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
Drawing note:
1) Load 1
| Material | Steel |
|---|---|
| Finishing | Zinc-plated and passivated |
| C1 | 21,5 |
|---|---|
| B1 | 52 |
| H | 186 |
| Força de tensão F3 N | 1150 |
| Ângulo de abertura braço de fixação na posição 1 | 105° |
| C | 32 |
| L | 115 |
| Ângulo de abertura braço de fixação sem batente | 160° |
| A | 25 |
| A3 | 19 |
| A1 | 43 |
| Ângulo de abertura cabo em posição 1 | 65° |
| Ângulo de abertura cabo sem batente | 90° |
| B | 34,5 |
| A2 | 9 |
| L1 | 65 |
| Força manual FH N | 130 |
| M | M8x60 |
| Força de retenção F1 N | 3000 |
| D | 8 |
| Versão 1 | Padrão |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base horizontal |
| Tipo de produto | eixo de aperto fixo |
