PAK0058.0150N
Toggle clamp, Horizontal base, Standard, F2=1650, Adjustable clamping shaft M06X50, Untreated stainless steel
Estimated delivery: On request
Material:
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| Força manual FH N | 120 |
|---|---|
| M | M6x50 |
| A | 12,7 |
| A1 | 27 |
| Ângulo de abertura cabo em posição 1 | 75° |
| B3 | 6,4 |
| L | 70 |
| Força de tensão F4 N | 1050 |
| C1 | 11 |
| D | 5,1 |
| H | 121 |
| Força de retenção F1 N | 1350 |
| L1 | 43 |
| B | 27 |
| F2 | 1650 |
| Ângulo de abertura braço de fixação na posição 1 | 95° |
| A2 | 7 |
| Força de tensão F3 N | 800 |
| C | 23 |
| Ângulo de abertura braço de fixação sem batente | 185° |
| Ângulo de abertura cabo sem batente | 110° |
| B1 | 38 |
| Versão 1 | Padrão |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base horizontal |
| Tipo de produto | eixo de aperto regulável |
