PAK0058.0250N
Toggle clamp, Horizontal base, Standard, F2=2800, Adjustable clamping shaft M08X60, Untreated stainless steel
Estimated delivery: On request
Material:
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
Steel or stainless steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Stainless steel with surface without corrosion protection.
Oil-resistant plastic handle.
Order example:
K0058.0250N
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In versions K0058.0075, K0058.0100 and K0058.0150, a neoprene plunger is included in the scope of delivery.
In versions K0058.0075N, K0058.0150N and K0058.0250N, the mounting bracket cannot be supplied in stainless steel.
Accessories:
K0098
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) End-of-stroke pin position 1
2) End-of-stroke pin position 2
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| Ângulo de abertura braço de fixação sem batente | 160° |
|---|---|
| L | 110 |
| H | 175 |
| A1 | 35 |
| Força manual FH N | 190 |
| C1 | 17,5 |
| Força de tensão F3 N | 900 |
| Força de retenção F1 N | 1000 |
| D | 7,1 |
| F2 | 2800 |
| B1 | 47 |
| A | 19 |
| B3 | 8,8 |
| B | 32 |
| Ângulo de abertura braço de fixação na posição 2 | 125° |
| Ângulo de abertura cabo em posição 2 | 85° |
| A2 | 8 |
| M | M8x60 |
| L1 | 75 |
| Ângulo de abertura cabo em posição 1 | 70° |
| Ângulo de abertura cabo sem batente | 100° |
| Força de tensão F4 N | 1700 |
| C | 32 |
| Ângulo de abertura braço de fixação na posição 1 | 95° |
| Versão 1 | Padrão |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base horizontal |
| Tipo de produto | eixo de aperto regulável |
