PAK0062.0300
Vertical toggle clamp steel, Bent base, Components: plastic, Orange, M=M08X60
Estimated delivery: On request
Material:
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0062.0200
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In version K0062.0100, a neoprene plunger is included in the scope of delivery.
Accessories:
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) Load 1
Steel.
Version:
zinc-plated and passivated part.
Phosphated tip and nuts.
Oil-resistant plastic handle.
Order example:
K0062.0200
Note:
The opening angle of the clamping arm and handle can be increased or reduced by repositioning or removing the end stop pin.
In version K0062.0100, a neoprene plunger is included in the scope of delivery.
Accessories:
K0100
K0101
K0102
K0103
K0106
K0107
Drawing note:
1) Load 1
| Material | Steel |
|---|---|
| Finishing | Zinc-plated and passivated |
| B1 | 51 |
|---|---|
| Ângulo de abertura braço de fixação na posição 1 | 105° |
| Força de retenção F2 N | 3700 |
| L | 143 |
| C1 | 19 |
| Força de tensão F4 N | 1850 |
| C | 82 |
| B | 35 |
| D | 6,8 |
| Força de tensão F3 N | 900 |
| A2 | 8 |
| H | 235 |
| L2 | 51 |
| A3 | 16 |
| A | 35 |
| Ângulo de abertura cabo sem batente | 90° |
| A1 | 51 |
| Ângulo de abertura cabo em posição 1 | 65° |
| L1 | 92 |
| B3 | 8,8 |
| Ângulo de abertura braço de fixação sem batente | 160° |
| Força de retenção F1 N | 2000 |
| M | M8x60 |
| Força manual FH N | 130 |
| Versão 1 | vertical |
| Material dos componentes | plástico |
| Denominação | Grampo rápido |
| Tipo de cabo para grampos rápidos | vertical |
| Cor dos componentes | laranja |
| Versão 2 | base dobrada |
| Tipo de produto | eixo de aperto regulável |
